I got a bit tired of heavy pot lids dropping on my toes when opening the kitchen cupboard while overflowing with culinary fervor. I already broke a glass lid a few weeks ago. So it was time to look for a proper pair of pot lid holders. These brushed metal hooks seemed to be just the right size to allow the door to close still. And while not the cheapest option, they look aesthetically pleasing and match with our kitchen cupboard interior. The hooks arrived in a small, plain unbranded white cardboard box. There was no instruction and only a single pair of screws and wall plugs were included, although we bought a set of 2 hooks.The installation was nevertheless very straightforward due to the 3M tape on the back. So far I haven’t used the screws, but might do so at a later stage in case the tape comes loose. You just need a measure and a level tool to make sure the hooks are placed straight. It took took me no more than 5 minutes to put them both in place. The tape seems strong enough for now to carry quite some weight.The hooks are very versatile and I might for example buy a few more to fix cutting boards to the inside of another door as well.Very pleased with the result and look. And would therefore highly recommend.

Good quality and very good price

Todo bien.

Sturdy enough to hold a heavy wood cutting board. I needed something to fit in a small 4” wide area we no access for screw mount and these were perfect. And the 3m adhesive is rated for 20lbs. Clean w alcohol before installing and works perfectly.

Super Halterung. Benutze es für meine Küchenwaage, da sie so ordentlich und Platzsparend verstaut ist. Haben es hin geschraubt, zu kleben wäre auch möglich gewesen. Ein kleines Schneidebrett passt auch gut rein.Würde ich jederzeit wieder kaufen :)

もう何個か欲しくなりました。

The rack was well made, true to size and is sturdy. I chose to mount it with screws not the adhesive. Works really well!

Encantada con este producto tamaño perfecto para organizar picadores y tapas de las ollas

Qualitativ sehr gut. Der Kleber hält bombenfest.Leider habe ich ein Halter an einer falschen Stelle geklebt und wollte es abmachen. Der Kleber ist so stark, dass ich nur mit aller Mühe es geschafft habe, den Halter wieder zu entfernen.

Easy to install, clean design.

These are and have been a god send. I don't have much space & I've placed mine above the cooker on the side of the cupboard which it sticks to amazingly. It isn't budging.. I've got a heavy butchers block chopping board on mine. Even with the heat rising from the cooker, it doesn't affect the stickiness of the item. The other I have is attached to the side of the fridge holding a tray. Theres NO WAY they're coming off lol. The depth of the holder is 4.6cm, just under 2 . They're almost like thyre built to last, and strong stickiness. They do the job really well. Thanks.

Perfect solution to store all of my pan lids. Just stick them on the side of the fridge. It’s pretty sturdy.

Perfect solution to store all of my pan lids. Just stick them on the side of the fridge. It’s pretty sturdy.

Wanted this to work. Alas they are too big for my largest cook pot lids. The lids will not stand up but flop so far over I’m afraid they will fall and break. The thickness of the spacing seems to be better suited for wooden cutting boards.

Wanted this to work. Alas they are too big for my largest cook pot lids. The lids will not stand up but flop so far over I’m afraid they will fall and break. The thickness of the spacing seems to be better suited for wooden cutting boards.

Very helpful making vertical storage for thin items in RV using 3. Might add a forth

Im rating this simple stainless steel pot lid rack as an A+. First. I ordered this on Friday on a holiday weekend (Labor Day) and received it Monday morning (Labor Day). Then when I received it I had to test to see if it was actually stainless steel because the price was relatively inexpensive, even if it did come from China and its very typical that cheap items like this that list them being stainless steel are actually a less expensive alloy that may look like stainless steel but in reality its carbon content is so high it rusts very quickly. Very very little magnetism in this steel, just barley could detect the ferrous properties using a very powerful magnet so I would believe it actually is 504 stainless. I cant rate the adhesion ability to hold up heavy items because in addition to using the adhesive back I also used two screws to attach this to my wood kitchen cabinets. im using it as a shelf to support a relatively weighty cutting board, maybe 5 pounds total. Before I added the extra two screws and after I used the adhesive backing to stick this to my wood cabinets I did test to see if just the adhesive backing would hold the cutting board. It did not fail holding the 5 pound cutting board but I didn't want to risk the possibility of the adhesive failing so I used the additional two screws. The two L shaped brackets appear to be spot welded to the mounting plate from the back side so no ugly well or discoloration is visible from the front. Im going to purchase another one because its actually perfect for my application and its never going to rust or discolor. The stainless steel and straight lines would go well in a modern kitchen with other stainless steel appliances are present.

まな板スタンドだと水垢で黒くなるのがストレスでしたが、これなら全然黒くならないし、粘着力も抜群なので、快適です。少々お値段が張るので考えましたが、買って大正解！

Put it on the counter to keep our cutting boards from falling down

まな板が倒れることなく、しっかりしていて安心しました。